Current File : //lib/dotnet/sdk/7.0.119/Microsoft.Common.CrossTargeting.targets
<!--
***********************************************************************************************
Microsoft.Common.CrossTargeting.targets
WARNING: DO NOT MODIFY this file unless you are knowledgeable about MSBuild and have
created a backup copy. Incorrect changes to this file will make it
impossible to load or build your projects from the command-line or the IDE.
Copyright (C) Microsoft Corporation. All rights reserved.
***********************************************************************************************
-->
<Project DefaultTargets="Build">
<PropertyGroup>
<BuildInParallel Condition="'$(BuildInParallel)' == ''">true</BuildInParallel>
<ImportByWildcardBeforeMicrosoftCommonCrossTargetingTargets Condition="'$(ImportByWildcardBeforeMicrosoftCommonCrossTargetingTargets)' == ''">true</ImportByWildcardBeforeMicrosoftCommonCrossTargetingTargets>
</PropertyGroup>
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.CrossTargeting.targets\ImportBefore\*.targets"
Condition="'$(ImportByWildcardBeforeMicrosoftCommonCrossTargetingTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.CrossTargeting.targets\ImportBefore')"/>
<Import Project="$(CustomBeforeMicrosoftCommonCrossTargetingTargets)" Condition="'$(CustomBeforeMicrosoftCommonCrossTargetingTargets)' != '' and Exists('$(CustomBeforeMicrosoftCommonCrossTargetingTargets)')"/>
<Target Name="GetTargetFrameworks"
DependsOnTargets="GetTargetFrameworksWithPlatformFromInnerBuilds"
Returns="@(_ThisProjectBuildMetadata)">
<Error Condition="'$(IsCrossTargetingBuild)' != 'true'"
Text="Internal MSBuild error: CrossTargeting GetTargetFrameworks target should only be used in cross targeting (outer) build" />
<CombineXmlElements
RootElementName="AdditionalProjectProperties"
XmlElements="@(_TargetFrameworkInfo->'%(AdditionalPropertiesFromProject)')">
<Output TaskParameter="Result"
PropertyName="_AdditionalPropertiesFromProject"/>
</CombineXmlElements>
<ItemGroup>
<_ThisProjectBuildMetadata Include="$(MSBuildProjectFullPath)">
<TargetFrameworks>@(_TargetFrameworkInfo)</TargetFrameworks>
<TargetFrameworkMonikers>@(_TargetFrameworkInfo->'%(TargetFrameworkMonikers)')</TargetFrameworkMonikers>
<TargetPlatformMonikers>@(_TargetFrameworkInfo->'%(TargetPlatformMonikers)')</TargetPlatformMonikers>
<AdditionalPropertiesFromProject>$(_AdditionalPropertiesFromProject)</AdditionalPropertiesFromProject>
<HasSingleTargetFramework>false</HasSingleTargetFramework>
<IsRidAgnostic>@(_TargetFrameworkInfo->'%(IsRidAgnostic)')</IsRidAgnostic>
<!-- Extract necessary information for SetPlatform negotiation -->
<!-- This target does not run for cpp projects. -->
<IsVcxOrNativeProj>false</IsVcxOrNativeProj>
<Platform Condition="$([MSBuild]::AreFeaturesEnabled('17.4'))">$(Platform)</Platform>
<Platforms>$(Platforms)</Platforms>
</_ThisProjectBuildMetadata>
</ItemGroup>
</Target>
<Target Name="_ComputeTargetFrameworkItems" Returns="@(InnerOutput)">
<ItemGroup>
<_TargetFramework Include="$(TargetFrameworks)" />
<!-- Make normalization explicit: Trim; Deduplicate by keeping first occurrence, case insensitive -->
<_TargetFrameworkNormalized Include="@(_TargetFramework->Trim()->Distinct())" />
<_InnerBuildProjects Include="$(MSBuildProjectFile)">
<AdditionalProperties>TargetFramework=%(_TargetFrameworkNormalized.Identity)</AdditionalProperties>
</_InnerBuildProjects>
</ItemGroup>
</Target>
<Target Name="GetTargetFrameworksWithPlatformFromInnerBuilds"
DependsOnTargets="_ComputeTargetFrameworkItems">
<MSBuild Projects="@(_InnerBuildProjects)"
Condition="'@(_InnerBuildProjects)' != '' "
Targets="GetTargetFrameworksWithPlatformForSingleTargetFramework"
BuildInParallel="$(BuildInParallel)">
<Output ItemName="_TargetFrameworkInfo" TaskParameter="TargetOutputs" />
</MSBuild>
</Target>
<!--
============================================================
DispatchToInnerBuilds
Builds this project with /t:$(InnerTarget) /p:TargetFramework=X for each
value X in $(TargetFrameworks)
[IN]
$(TargetFrameworks) - Semicolon delimited list of target frameworks.
$(InnerTargets) - The targets to build for each target framework
[OUT]
@(InnerOutput) - The combined output items of the inner targets across
all target frameworks..
============================================================
-->
<Target Name="DispatchToInnerBuilds"
DependsOnTargets="_ComputeTargetFrameworkItems"
Returns="@(InnerOutput)">
<!-- If this logic is changed, also update Clean -->
<MSBuild Projects="@(_InnerBuildProjects)"
Condition="'@(_InnerBuildProjects)' != '' "
Targets="$(InnerTargets)"
BuildInParallel="$(BuildInParallel)">
<Output ItemName="InnerOutput" TaskParameter="TargetOutputs" />
</MSBuild>
</Target>
<!--
============================================================
Build
Cross-targeting version of Build.
[IN]
$(TargetFrameworks) - Semicolon delimited list of target frameworks.
$(InnerTargets) - The targets to build for each target framework. Defaults
to 'Build' if unset, but allows override to support
`msbuild /p:InnerTargets=X;Y;Z` which will build X, Y,
and Z targets for each target framework.
[OUT]
@(InnerOutput) - The combined output items of the inner targets across
all builds.
============================================================
-->
<Target Name="Build" DependsOnTargets="_SetBuildInnerTarget;DispatchToInnerBuilds" />
<Target Name="_SetBuildInnerTarget" Returns="@(InnerOutput)">
<PropertyGroup Condition="'$(InnerTargets)' == ''">
<InnerTargets>Build</InnerTargets>
</PropertyGroup>
</Target>
<!--
============================================================
Clean
Cross-targeting version of clean.
Inner-build dispatch is a clone of DispatchToInnerBuilds;
the only reason it's replicated is that it must be a different
target to be run in the same build (e.g. by Rebuild or by
a /t:Clean;Build invocation.
============================================================
-->
<Target Name="Clean"
DependsOnTargets="_ComputeTargetFrameworkItems">
<!-- If this logic is changed, also update DispatchToInnerBuilds -->
<MSBuild Projects="@(_InnerBuildProjects)"
Condition="'@(_InnerBuildProjects)' != '' "
Targets="Clean"
BuildInParallel="$(BuildInParallel)" />
</Target>
<!--
============================================================
Rebuild
Cross-targeting version of rebuild.
============================================================
-->
<Target Name="Rebuild" DependsOnTargets="Clean;Build" />
<!--
This will import NuGet restore targets. We need restore to work before any package assets are available.
-->
<PropertyGroup>
<MSBuildUseVisualStudioDirectoryLayout Condition="'$(MSBuildUseVisualStudioDirectoryLayout)'==''">$([MSBuild]::IsRunningFromVisualStudio())</MSBuildUseVisualStudioDirectoryLayout>
<NuGetRestoreTargets Condition="'$(NuGetRestoreTargets)'=='' and '$(MSBuildUseVisualStudioDirectoryLayout)'=='true'">$([MSBuild]::GetToolsDirectory32())\..\..\..\Common7\IDE\CommonExtensions\Microsoft\NuGet\NuGet.targets</NuGetRestoreTargets>
<NuGetRestoreTargets Condition="'$(NuGetRestoreTargets)'==''">$(MSBuildToolsPath)\NuGet.targets</NuGetRestoreTargets>
</PropertyGroup>
<Import Project="$(NuGetRestoreTargets)" />
<Import Project="$(CustomAfterMicrosoftCommonCrossTargetingTargets)" Condition="'$(CustomAfterMicrosoftCommonCrossTargetingTargets)' != '' and Exists('$(CustomAfterMicrosoftCommonCrossTargetingTargets)')"/>
<!--
Allow extensions like NuGet restore to work before any package assets are available.
-->
<PropertyGroup>
<ImportByWildcardAfterMicrosoftCommonCrossTargetingTargets Condition="'$(ImportByWildcardAfterMicrosoftCommonCrossTargetingTargets)' == ''">true</ImportByWildcardAfterMicrosoftCommonCrossTargetingTargets>
</PropertyGroup>
<Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.CrossTargeting.targets\ImportAfter\*.targets"
Condition="'$(ImportByWildcardAfterMicrosoftCommonCrossTargetingTargets)' == 'true' and exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.CrossTargeting.targets\ImportAfter')"/>
<!--
Import project extensions which usually come from packages. Package management systems will create a file at:
$(MSBuildProjectExtensionsPath)\$(MSBuildProjectFile).<SomethingUnique>.targets
Each package management system should use a unique moniker to avoid collisions. It is a wild-card iport so the package
management system can write out multiple files but the order of the import is alphabetic because MSBuild sorts the list.
This is the same import that would happen in an inner (non-cross targeting) build. Package management systems are responsible for generating
appropriate conditions based on $(IsCrossTargetingBuild) to pull in only those package targets that are meant to participate in a cross-targeting
build.
-->
<PropertyGroup>
<ImportProjectExtensionTargets Condition="'$(ImportProjectExtensionTargets)' == ''">true</ImportProjectExtensionTargets>
</PropertyGroup>
<Import Project="$(MSBuildProjectExtensionsPath)$(MSBuildProjectFile).*.targets" Condition="'$(ImportProjectExtensionTargets)' == 'true' and exists('$(MSBuildProjectExtensionsPath)')" />
<PropertyGroup>
<ImportDirectoryBuildTargets Condition="'$(ImportDirectoryBuildTargets)' == ''">true</ImportDirectoryBuildTargets>
</PropertyGroup>
<!--
Determine the path to the directory build targets file if the user did not disable $(ImportDirectoryBuildTargets) and
they did not already specify an absolute path to use via $(DirectoryBuildTargetsPath)
-->
<PropertyGroup Condition="'$(ImportDirectoryBuildTargets)' == 'true' and '$(DirectoryBuildTargetsPath)' == ''">
<_DirectoryBuildTargetsFile Condition="'$(_DirectoryBuildTargetsFile)' == ''">Directory.Build.targets</_DirectoryBuildTargetsFile>
<_DirectoryBuildTargetsBasePath Condition="'$(_DirectoryBuildTargetsBasePath)' == ''">$([MSBuild]::GetDirectoryNameOfFileAbove($(MSBuildProjectDirectory), '$(_DirectoryBuildTargetsFile)'))</_DirectoryBuildTargetsBasePath>
<DirectoryBuildTargetsPath Condition="'$(_DirectoryBuildTargetsBasePath)' != '' and '$(_DirectoryBuildTargetsFile)' != ''">$([System.IO.Path]::Combine('$(_DirectoryBuildTargetsBasePath)', '$(_DirectoryBuildTargetsFile)'))</DirectoryBuildTargetsPath>
</PropertyGroup>
<Import Project="$(DirectoryBuildTargetsPath)" Condition="'$(ImportDirectoryBuildTargets)' == 'true' and exists('$(DirectoryBuildTargetsPath)')"/>
</Project>
Mini Shell