Current File : //backups/router/usr/local/etc/dhcp6c.conf.sample
# The following is an example for use with IPv6 auto-configuration.
# The "information-only" statement makes dhcp6c exchange informational
# configuration parameters with servers. A list of DNS server addresses
# is an example of such parameters. This statement is useful when the
# client does not need stateful configuration parameters such as IPv6
# addresses or prefixes.
interface ne0 {
information-only;
};
# The following is a sample configuration for a client on a LAN
# where IPv6 addresses are assigned via DHCPv6 ("stateful address
# assignment"). Use this if you want the client to query the
# DHCPv6 server for an IPv6 address and for DNS servers, as in
# traditional IPv4 DHCP.
interface em0 {
send ia-na 0;
send rapid-commit;
send domain-name-servers;
};
id-assoc na {
};
# The following is an example configuration for delegation of an IPv6 prefix
# from an upstream service provider. With this configuration dhcp6c will
# send solicit messages containing an IA_PD option, with an IAID 0, on to
# an upstream PPP link, ppp0. After receiving some prefixes from a server,
# dhcp6c will then configure derived IPv6 prefixes with the SLA ID 1 on a
# local ethernet interface, ne0. Note that the IAID for the id-assoc
# statement is 0 according to the default.
interface ppp0 {
send ia-pd 0;
};
id-assoc pd {
prefix-interface ne0 {
sla-id 1;
};
};
# If a shared secret was to be configured in both the client and the server
# for DHCPv6 authentication, it would be specified in this file as follows:
keyinfo kame-key {
realm "kame.net";
keyid 1;
secret "5pvW2g48OHPvkYMJSw0vZA==";
};
# And the interface statement would be modified as follows:
interface ppp0 {
send ia-pd 0;
send authentication kame;
};
Mini Shell