Current File : //data/old/usr/local/include/gpac/modules/raster2d.h
/*
* GPAC - Multimedia Framework C SDK
*
* Authors: Jean Le Feuvre
* Copyright (c) Telecom ParisTech 2000-2012
* All rights reserved
*
* This file is part of GPAC / modules interfaces
*
* GPAC is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* GPAC is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#ifndef _GF_MODULE_RASTER2D_H_
#define _GF_MODULE_RASTER2D_H_
#ifdef __cplusplus
extern "C" {
#endif
#include <gpac/path2d.h>
#include <gpac/module.h>
#include <gpac/color.h>
/*stencil types*/
typedef enum
{
/*solid color stencil*/
GF_STENCIL_SOLID = 0,
/*linear color gradient stencil*/
GF_STENCIL_LINEAR_GRADIENT,
/*radial color gradient stencil*/
GF_STENCIL_RADIAL_GRADIENT,
/*texture stencil*/
GF_STENCIL_VERTEX_GRADIENT,
/*texture stencil*/
GF_STENCIL_TEXTURE,
} GF_StencilType;
/*gradient filling modes*/
typedef enum
{
/*edge colors are repeated until path is filled*/
GF_GRADIENT_MODE_PAD,
/*pattern is inversed each time it's repeated*/
GF_GRADIENT_MODE_SPREAD,
/*pattern is repeated to fill path*/
GF_GRADIENT_MODE_REPEAT
} GF_GradientMode;
/*texture tiling flags*/
typedef enum
{
/*texture is repeated in its horizontal direction*/
GF_TEXTURE_REPEAT_S = (1<<1),
/*texture is repeated in its horizontal direction*/
GF_TEXTURE_REPEAT_T = (1<<2),
/*texture is fliped vertically*/
GF_TEXTURE_FLIP = (1<<3),
} GF_TextureTiling;
/*filter levels for texturing - up to the graphics engine but the following levels are used by
the client*/
typedef enum
{
/*high speed mapping (ex, no filtering applied)*/
GF_TEXTURE_FILTER_HIGH_SPEED,
/*compromise between speed and quality (ex, filter to nearest pixel)*/
GF_TEXTURE_FILTER_MID,
/*high quality mapping (ex, bi-linear/bi-cubic interpolation)*/
GF_TEXTURE_FILTER_HIGH_QUALITY
} GF_TextureFilter;
/* rasterizer antialiasing depending on the graphics engine*/
typedef enum
{
/*raster shall use no antialiasing */
GF_RASTER_HIGH_SPEED,
/*raster should use fast mode and good quality if possible*/
GF_RASTER_MID,
/*raster should use full antialiasing*/
GF_RASTER_HIGH_QUALITY
} GF_RasterLevel;
/*user routines for raserizer. common syntaxes:
@cbk: user defined callback
@x, y: first pixel position of the run, in device memory (top-left) coordinates
@run_h_len: number of pixels to fill on line
@color: color to fill pixel with. USER MUST IGNORE THE ALPHA COMPONENT OF THIS COLOR, the final
alpha is computed by the lib
@alpha: blending amount (0->0xFF) for the pixels
*/
typedef void (*raster_cbk_fill_run_alpha) (void *, u32, u32, u32, GF_Color, u8);
typedef void (*raster_cbk_fill_run_no_alpha) (void *, u32, u32, u32, GF_Color);
typedef void (*raster_cbk_fill_rect)(void *cbk, u32 x, u32 y, u32 width, u32 height, GF_Color color);
typedef struct
{
void *cbk;
/*fills line pixels without any blending operation*/
raster_cbk_fill_run_no_alpha fill_run_no_alpha;
/* fills line pixels with blending operation - alpha combines both fill color and anti-aliasing blending */
raster_cbk_fill_run_alpha fill_run_alpha;
/*fills rectangle*/
raster_cbk_fill_rect fill_rect;
} GF_RasterCallback;
/*opaque handler for all stencils*/
typedef void *GF_STENCIL;
/*visual surface handler*/
typedef void *GF_SURFACE;
/*interface name and version for raster2D*/
#define GF_RASTER_2D_INTERFACE GF_4CC('G','R','2', '3')
/*graphics driver*/
typedef struct _raster2d_interface
{
/* interface declaration*/
GF_DECL_MODULE_INTERFACE
GF_STENCIL (*stencil_new) (struct _raster2d_interface *, GF_StencilType type);
/*common destructor for all stencils*/
void (*stencil_delete) (GF_STENCIL _this);
/*set stencil transformation matrix*/
GF_Err (*stencil_set_matrix) (GF_STENCIL _this, GF_Matrix2D *mat);
/*solid brush - set brush color*/
GF_Err (*stencil_set_brush_color) (GF_STENCIL _this, GF_Color c);
/*gradient brushes*/
/*sets gradient repeat mode - return GF_NOT_SUPPORTED if driver doesn't support this to let the app compute repeat patterns
this may be called before the gradient is setup*/
GF_Err (*stencil_set_gradient_mode) (GF_STENCIL _this, GF_GradientMode mode);
/*set linear gradient. line is defined by start and end, and you can give interpolation colors at specified positions*/
GF_Err (*stencil_set_linear_gradient) (GF_STENCIL _this, Fixed start_x, Fixed start_y, Fixed end_x, Fixed end_y);
/*radial gradient brush center point, focal point and radius - colors can only be set through set_interpolation */
GF_Err (*stencil_set_radial_gradient) (GF_STENCIL _this, Fixed cx, Fixed cy, Fixed fx, Fixed fy, Fixed x_radius, Fixed y_radius);
/*radial and linear gradient (not used with vertex) - set color interpolation at given points,
@pos[i]: distance from (center for radial, start for linear) expressed between 0 and 1 (1 being the gradient bounds)
@col[i]: associated color
NOTE 1: the colors at 0 and 1.0 MUST be provided
NOTE 2: colors shall be fed in order from 0 to 1
NOTE 3: this overrides the colors provided for linear gradient
*/
GF_Err (*stencil_set_gradient_interpolation) (GF_STENCIL _this, Fixed *pos, GF_Color *col, u32 count);
/*vertex gradient : set limit path */
GF_Err (*stencil_set_vertex_path) (GF_STENCIL _this, GF_Path *path);
/*set the center of the gradient*/
GF_Err (*stencil_set_vertex_center) (GF_STENCIL _this, Fixed cx, Fixed cy, u32 color);
/*set the center of the gradient*/
GF_Err (*stencil_set_vertex_colors) (GF_STENCIL _this, u32 *colors, u32 nbCol);
/*sets global alpha blending level for stencil (texture and gradients)
the alpha channel shall be combined with the color matrix if any*/
GF_Err (*stencil_set_alpha) (GF_STENCIL _this, u8 alpha);
/*set stencil texture
@pixels: texture data, from top to bottom
@width, @height: texture size
@stride: texture horizontal pitch (bytes to skip to get to next row)
@pixelFormat: texture pixel format as defined in file constants.h
@destination_format_hint: this is the current pixel format of the destination surface, and is given
as a hint in case the texture needs to be converted by the stencil
@no_copy: if set, specifies the texture data shall not be cached by the module (eg it must be able
to directly modify the given memory
NOTE: this stencil acts as a data wrapper, the pixel data is not required to be locally copied
data is not required to be available for texturing until the stencil is used in a draw operation
*/
GF_Err (*stencil_set_texture) (GF_STENCIL _this, char *pixels, u32 width, u32 height, u32 stride, GF_PixelFormat pixelFormat, GF_PixelFormat destination_format_hint, Bool no_copy);
/*signals the texture has been modified (internal texture only)*/
void (*stencil_texture_modified) (GF_STENCIL _this);
/*sets texture tile mode*/
GF_Err (*stencil_set_tiling) (GF_STENCIL _this, GF_TextureTiling mode);
/*sets texture filtering mode*/
GF_Err (*stencil_set_filter) (GF_STENCIL _this, GF_TextureFilter filter_mode);
/*set stencil color matrix - texture stencils only. If matrix is NULL, resets current color matrix*/
GF_Err (*stencil_set_color_matrix) (GF_STENCIL _this, GF_ColorMatrix *cmat);
/*creates surface object*/
/* @center_coords: true indicates mathematical-like coord system,
false indicates computer-like coord system */
GF_SURFACE (*surface_new) (struct _raster2d_interface *, Bool center_coords);
/* delete surface object */
void (*surface_delete) (GF_SURFACE _this);
/* attach surface object to device object (Win32: HDC) width and height are target surface size*/
GF_Err (*surface_attach_to_device) (GF_SURFACE _this, void *os_handle, u32 width, u32 height);
/* attach surface object to stencil object*/
GF_Err (*surface_attach_to_texture) (GF_SURFACE _this, GF_STENCIL sten);
/* attach surface object to memory buffer if supported
@pixels: texture data
@width, @height: texture size
@pitch_x: texture horizontal pitch (bytes to skip to get to next pixel). O means linear frame buffer (eg pitch_x==bytes per pixel)
@pitch_y: texture vertical pitch (bytes to skip to get to next line)
@pixelFormat: texture pixel format
*/
GF_Err (*surface_attach_to_buffer) (GF_SURFACE _this, char *pixels, u32 width, u32 height, s32 pitch_x, s32 pitch_y, GF_PixelFormat pixelFormat);
GF_Err (*surface_attach_to_callbacks) (GF_SURFACE _this, GF_RasterCallback *callbacks, u32 width, u32 height);
/* detach surface object */
void (*surface_detach) (GF_SURFACE _this);
/*sets rasterizer precision */
GF_Err (*surface_set_raster_level) (GF_SURFACE _this, GF_RasterLevel RasterSetting);
/* set the given matrix as the current transformations for all drawn paths
if NULL reset the current transformation */
GF_Err (*surface_set_matrix) (GF_SURFACE _this, GF_Matrix2D *mat);
/* set the given rectangle as a clipper - nothing will be drawn outside this clipper
if the clipper is NULL then no clipper is set
NB: the clipper is not affected by the surface matrix and is given in pixels
CF ABOVE NOTE ON CLIPPERS*/
GF_Err (*surface_set_clipper) (GF_SURFACE _this, GF_IRect *rc);
/*sets the given path as the current one for drawing - the surface transform is NEVER changed between
setting the path and filling, only the clipper may change*/
GF_Err (*surface_set_path) (GF_SURFACE _this, GF_Path *path);
/*fills the current path using the given stencil - can be called several times with the same current path*/
GF_Err (*surface_fill) (GF_SURFACE _this, GF_STENCIL stencil);
/*flushes to surface*/
GF_Err (*surface_flush) (GF_SURFACE _this);
/*clears given pixel rect on the surface with the given color - REQUIRED
the given rect is formatted as a clipper - CF ABOVE NOTE ON CLIPPERS*/
GF_Err (*surface_clear)(GF_SURFACE _this, GF_IRect *rc, GF_Color col);
/*private:*/
void *internal;
} GF_Raster2D;
#ifdef __cplusplus
}
#endif
#endif /*_GF_MODULE_RASTER2D_H_*/
Mini Shell